Table of Contents
Advertisement
Description of the device
1.6 Service button SET
Meaning of the LEDs on the right-hand side of the device
LED
DCV5
VPN
IN
OUT
Meaning of the two LEDs on the connectors X2P1 or X2P2
LED
Green LED
(top)
Yellow LED
(bottom)
1.6
Service button SET
In the small hole labeled SET, there is a button that is used to reboot the device. During a
reboot, the device is reset to its factory settings.
You can press the button with a thin object, for example a straightened paper clip.
You will find more information on resetting the device in the section Factory settings
(Page 139).
16
Status
On
Off
On
Off
On
Off
On
Off
Status
Flashing
Off
On
Off
Meaning
Device turned on, power supply present.
Device turned off, no power supply.
At least one VPN connection established
No VPN connection established
In port active
In port not active
Out port active
Out port not active
Meaning
RX/TX
Data transfer via the Ethernet connection
No data transfer via the Ethernet connection
Link status
Existing Ethernet connection to the local
application or the local area network
No Ethernet connection to the local application or
the local area network
Operating Instructions, 12/2012, C79000-G8976-C258-02
SCALANCE M875
Advertisement
Table of Contents
