Gcpp Support For Remote Phy; Hardware Compatibility Matrix For Cisco Remote Phy Shelf 7200 - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

GCPP Support for Remote PHY

This document provides information on the Generic Control Protocol Principal (GCPP) support on Cisco
cBR-8 series routers.
Finding Feature Information
Your software release may not support all the features that are documented in this module. For the latest
feature information and caveats, see the release notes for your platform and software release. The Feature
Information Table at the end of this document provides information about the documented features and lists
the releases in which each feature is supported.
•
•
•
•
•
Hardware Compatibility Matrix for Cisco Remote PHY Shelf
7200
Note Unless otherwise specified, the hardware components introduced in a given Cisco Remote PHY Shelf 7200
Software Release are supported in all subsequent releases.
Table 13: Hardware Compatibility Matrix for the Cisco Remote PHY Shelf 7200
Cisco CMTS Platform
Cisco cBR-8 Converged Broadband Router with
Cisco IOS XE Gibraltar 16.10.1 and Later Releases
Hardware Compatibility Matrix for Cisco Remote PHY Shelf 7200, on page 39
Information About GCPP Support, on page 40
How to Configure GCPP Core, on page 41
Configuration Example, on page 41
Feature Information for GCPP Support, on page 42
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
7
C H A P T E R
Cisco Remote PHY Shelf 7200
Cisco Remote PHY Shelf 7200 Software 1.1 and
Later Releases
Cisco Remote PHY Shelf 7200
• PID—HA-RPHY
39