Debugging Cisco Smart Phy 7200 - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Cisco Remote PHY Shelf 7200 Management Guide for Cisco Remote PHY Shelf 7200 Software 1.x
3. Enable RPD auto reboot, after collecting all logs and CLI output.
R-PHY#clear reboot hold

Debugging Cisco Smart PHY 7200

Collect the show CLI outpus to debug Cisco Smart PHY 7200:
• To display eeprom information of the FCC, use the show diag eeprom command in privileged EXEC
• To display alarm, sensor, fan, FCC, and power related information, use the show group environment
• To display information about the PTP clock of the line card, use the show ptp clock command in privileged
• To view the sync state of the PTP clock, use the show tgc-clock command in privileged EXEC mode.
• To view your RPHY diagnostics, use the show platform diag command in privileged EXEC mode.
• To display Cisco Remote-PHY devices (RPD) of all groups, use the show cable rpd group command
• To display eRPD related information, use the show erpd command in privileged EXEC mode.
• To view virtual LAN configuration on your Remote PHY Shelf 7200 device, use the show trunk vlan
• To display event logging information and messages of the Cisco Remote PHY Devices (RPD), use the
• To display information on the software upgrade, use the upgrade control command.
• To view port mapping and link redundancy details, use the show running-config command in privileged
• To display the operation status of link redundancy, use the show link-redundancy command in privileged
For detailed information about the commands and sample outputs, see the Cisco Remote PHY Shelf 7200
Command Reference Guide.
• show upstream map counter <port number> <channel number> (show multiple times)
• show upstream uepi configuration
• show l2tp tunnel
• show l2tp session
mode.
command in privileged EXEC mode.
EXEC mode.
in privileged EXEC mode.
command in privileged EXEC mode.
show cable rpd event command in privileged EXEC mode.
EXEC mode.
EXEC mode.
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Debugging Cisco Smart PHY 7200
103