Verifying Multiple Cores Configuration - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Cisco Remote PHY Shelf 7200 Start Up Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Router(config-rpd-core)# rpd-ds 0 downstream-cable 3/0/2 profile 300 /* DS video channel
config*/
Router(config-rpd-core)# rpd-ds 0 downstream-cable 3/0/3 profile 400 /* DS video channel
config*/
Router(config-rpd-core)# rpd-us 0 upstream-cable 3/0/0 profile 101 /* US 0 docsis channel
config*/
Router(config-rpd-core)# rpd-us 1 upstream-cable 3/0/1 profile 101
config*/
Router(config-rpd-core)# depi depi_rpd_block22
Router(config-rpd-core)# exit
Router(config-rpd)# core-interface Te9/1/1 /* Support multiple core-interface for cases
such as video is using separate LC*/
Router(config-rpd-core)# rpd-ds 0 downstream-cable 9/0/1 profile 200
config*/
Router(config-rpd-core)# depi depi_rpd_block22
Router(config-rpd-core)# exit
Router(config-rpd)# r-dti 1
Router(config-rpd)# rpd-event profile 0
Router(config-rpd)# rpd-55d1-us-event profile 0

Verifying Multiple Cores Configuration

To display the information of the principal and auxiliary cores, use the show cable rpd command as shown
in the example below:
Router#
MAC Address
0004.9f00.0907
0004.9f00.0907
0004.9f00.0907
0004.9f00.0907
Note Only the active cores are displayed, stand-by cores are hidden.
show cable rpd
IP Address
120.100.2.20
120.100.2.20
120.100.2.20
120.100.2.20
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
/* RPD DEPI configuration.*/
/* RPD DEPI configuration.*/
I/F State
Te1/1/6 online Pri
Te1/1/0 online Aux
Te1/1/1 online Aux
Te1/1/2 online Aux
Verifying Multiple Cores Configuration
/* US 1 docsis channel
/* DS video channel
Role HA Name
Act node
Act node
Act node
Act node
37