Example: Dlm Configuration; Feature Information For Dlm - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Cisco Remote PHY Shelf 7200 Start Up Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Table 10: show cable rpd dlm Field Descriptions
Field
Last Average DLM

Example: DLM Configuration

The following example shows how to configure DLM:
Router# configure terminal
Router(config)#cable rpd 1
Router(config-rpd)#core-interface tenGigabitEthernet 3/1/0
Router(config-rpd-core)#network-delay dlm 10

Feature Information for DLM

Use Cisco Feature Navigator to find information about the platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software release,
feature set, or platform. To access Cisco Feature Navigator, go to the
on the Cisco.com page is not required.
Note The following table lists the software release in which a given feature is introduced. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Table 11: Feature Information for DLM
Feature Name
DEPI Latency Measurement
Description
It means the last time average DLM (AD). At first, the Last Average DLM (LAD) is
always 0, when the absolute value of (LAD - AD) exceeds or equal to 75us, LAD will
be updated to be the value of AD, MAP advance triggered to update, AD will keep
updating with the last (latest) 10 samples.
Releases
Cisco Remote PHY Shelf 7200
Software 1.1
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Example: DLM Configuration
www.cisco.com/go/cfn link. An account
Feature Information
This feature was introduced on the Cisco
Remote PHY Shelf 7200.
33