Feature Information For Software Image Upgrade - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Feature Information for Software Image Upgrade

Router# upgrade control show status
Image download aborted.
Router# show cable rpd-upgrade group all status
GROUP-ID: 7abd.44a1.0000
ServerAddress: 203.0.113.2
Protocol: HTTP
Status: Idle
Filename: bundle/test.itb.sign
Feature Information for Software Image Upgrade
Use Cisco Feature Navigator to find information about the platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software release,
feature set, or platform. To access Cisco Feature Navigator, go to the
on the Cisco.com page is not required.
Note The following table lists the software release in which a given feature is introduced. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Table 30: Feature Information for Software Image Upgrade
Feature Name
Software Image
Upgrade
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
94
Cisco Remote PHY Shelf 7200 Management Guide for Cisco Remote PHY Shelf 7200 Software 1.x
Releases
Cisco Remote PHY Shelf 7200
Software 1.1
www.cisco.com/go/cfn
Feature Information
This feature was introduced on the Cisco
Remote PHY Shelf 7200 device.
link. An account