Depi Latency Measurement; Hardware Compatibility Matrix For Cisco Remote Phy Shelf 7200 - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

DEPI Latency Measurement

This document describes how to configure the DEPI latency measurement on the Cisco cBR Series Converged
Broadband Router.
Finding Feature Information
Your software release may not support all the features that are documented in this module. For the latest
feature information and caveats, see the release notes for your platform and software release. The Feature
Information Table at the end of this document provides information about the documented features and lists
the releases in which each feature is supported.
•
•
•
•
•
Hardware Compatibility Matrix for Cisco Remote PHY Shelf
7200
Note Unless otherwise specified, the hardware components introduced in a given Cisco Remote PHY Shelf 7200
Software Release are supported in all subsequent releases.
Table 9: Hardware Compatibility Matrix for the Cisco Remote PHY Shelf 7200
Cisco CMTS Platform
Cisco cBR-8 Converged Broadband Router with
Cisco IOS XE Gibraltar 16.10.1 and Later Releases
Hardware Compatibility Matrix for Cisco Remote PHY Shelf 7200, on page 31
Information about DEPI Latency Measurement, on page 32
How to Configure DLM, on page 32
Example: DLM Configuration, on page 33
Feature Information for DLM, on page 33
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
5
C H A P T E R
Cisco Remote PHY Shelf 7200
Cisco Remote PHY Shelf 7200 Software 1.1 and
Later Releases
Cisco Remote PHY Shelf 7200
• PID—HA-RPHY
31