Resetting The Switch To Default - Planet IGS-5225-8T2S2X Quick Installation Quide

6. Resetting the Switch to Default

To reset the IP address to the default IP address "192.168.0.100"
and the user password to factory default mode (default password
is admin), press the hardware reset button on the front panel for
about 10 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of 192.168.0.xx
and default password. Be noted that all the previous setups will be
disappeared after the factory default reset is made.
Figure 6-1: IGS-5225-8T2S2X/IGS-5225-8P2S2X Reset Button
Console
115200,N,8,1
P1 P2 FAULT
11
11
12
9
9
10
7
5
3
1
Reset Button
RESET
I/O
1000 LNK ACT
10G LNK ACT
12
10
1000 LNK ACT
100 LNK ACT
8
6
4
1000 LNK ACT
2
100 LNK ACT
IGS-5225-8T2S2X
15