Reboot Switch; Reset To Default; Tftp Update Firmware; Restore Configure File - Planet VC-820M User Manual

dhcp
Description:
Set switch as dhcp client, it can get IP from dhcp server.
If you set this command, the switch will reboot.
show dhcp
Description:
show dhcp enable/disable.

6.7.3 Reboot switch

boot
Description:
Reboot (warm-start) the switch.

6.7.4 Reset to Default

erase startup-config
Description:
Reset configurations to default factory settings at next boot time.

6.7.5 TFTP Update Firmware

copy tftp firmware
Description:
Download firmware from TFTP server.
Syntax:
copy tftp firmware <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.

6.7.6 Restore Configure File

copy tftp <running-config | flash>
Description:
174
User's Manual of VC-820M