MUTOH ValueJet VJ-1604W Operation Instructions Manual page 11


Be sure to power OFF the machine and unplug the power cable from the outlet before cleaning the
machine. Use a damp cloth to clean the machine. Do not use thinner, benzene, alcohol or other active
agents. Doing so may result in damage or paint peeling from the casing.

Do not bend or pull the waste fluid tube. Doing so may cause waste fluid to leak out and malfunction of
the product.

Do not tilt the machine, place it against a wall or turn it upside down. Doing so may cause ink to leak
inside the machine. Movement after transport is also not covered by the warranty.

When cutting roll media, be careful of the following. Incorrect handling can result in injury to the hands
and fingers from the razor blade.
When holding the media, do not place fingers over the media cut groove.
o
Move the razor blade slowly along the media cutting groove.
o

To prevent back pains and other injuries, always work with at least 4 people to unpack or move the
machine. Keep the machine horizontally during transportation.

Do NOT transport the machine to another room without contacting your local Authorized Mutoh Dealer.
Operation instructions ValueJet 1604W
11 AP-77300 – Rev 1.1 -17/09/2009,
Chapter 1: Safety Instructions