MUTOH ValueJet VJ-1604W Operation Instructions Manual page 39


Press the [+] or [-] key to select "Set20: CR Maintenance".

Press the [Enter] key on the operation panel.
The operation panel displays "CR Mainte.: Start"
o
The display enters the CR Maintenance menu.
o
Step 3 : Press the [Enter] key on the operation panel.
Maintenance starts.
o
The print head moves to the centre
o
The operation panel displays "CR Mainte.: END"
o
Step 4 : Open the front cover
Notes

Perform the cutter replacement in a short time. Leaving the print head for a long time at the cutter
change position result in head clogging.
Step 5 : Gently push the knob of the razor blade and simultaneously rotate the cutter holder in the direction
illustrated.
Notes

Do not strongly press or suddenly release the razor blade.
Spring is inserted in the cutter compartment, so razor blade may spring out.

Do not push the razor blade all the way down.
Razor blade may damage inside the product.
2
1
3
N° name
1 Razor blade
2 Cutter holder
3 Cutter compartment
39
Operation Instructions ValueJet 1604W
Chapter 3 : Installing the Unit
AP-77300 – Rev 1.1 -17/09/2009,