MUTOH ValueJet VJ-1604W Operation Instructions Manual page 68

Step 12 : Perform Micro adjustment printing.
 Display the Media feed compensation menu on the operation panel.
 Press the [+] key or [–] key to select "PF4: Micro Adj. Print".
 Press the [Enter] key.
The operation panel displays "Printing".
o
Start Micro adjustment printing.
o
Current adjustment value
 After completing the micro adjustment printing, the operation panel displays "PF4: Micro Adj. Print".
Step 13 : Refer to the illustrations below and check the printing result.
Input the adjustment value
Step 14 : Set up the Micro Adjustment Change.
 Press the [+] key or [–] key to select "PF5: Micro Adj.Change".
 Press the [Enter] key.
o The operation panel displays "Micro: 0pulse".
 Press the [+] key or [–] key and enter the micro adjustment value according to the printing result in
the previous step.
 Press the [Enter] key.
o Saves the micro adjustment value.
o Displays "PF5: Micro Adj.Change".
o The Media feed compensation is complete.
Operation Instructions ValueJet 1604W
Chapter 5 : Preparations before printing
2
1
0
1
2
68 AP-77300 – Rev 1.1 -17/09/2009,