MUTOH ValueJet VJ-1604W Operation Instructions Manual page 64

Step 17 : Press the [Enter] key.

Start "Bi-D Quality" pattern printing.

Check the BI-D Quality pattern printing and select the number corresponding to the lines that are most
closely aligned.

"4" is selected in the next printing sample.
Step 18 : Press the [+] or [–] key to set the number that you have selected.
Step 19 : Press the [Enter] key.

Registers the set value for BI-D Quality.

The operation panel displays "Adjust5 BI-D quality".

Register the setting for Bi-D Normal (two-way printing/normal mode) in the same way as in previous
steps.
Operation Instructions ValueJet 1604W
Chapter 5 : Preparations before printing
64 AP-77300 – Rev 1.1 -17/09/2009,