5.5 MAKING THE PRINTER READY-TO-PRINT
Step
1
Choose the appropriate media.
2
Install and load the media.
3
OPTIONAL : Adjust the head
4
5
Set the printing conditions.
OPTIONAL: Perform (a) test
plot(s) and perform adjusting,
6
cleaning and replacing actions
Starting point: FULLY- INSTALLED VALUEJET
Action
Set the media type
height
when needed.
Result: READY-TO-PRINT VALUEJET
Operation Instructions ValueJet 1604W
Chapter 5 : Preparations before printing
↓
Reference
General info on usable media
Installing roll media
Loading roll media
Setting media type
Head Height Adjustment
Menu setup on the operation panel
Test Print
↓
69
AP-77300 – Rev 1.1 -17/09/2009,