MUTOH ValueJet VJ-1604W Operation Instructions Manual page 44

Attach the protective material (metal plate) for attaching the head unit, and fix it with
Step 7 :
thumbscrews.
Notes

The casters supplied with the dedicated stand are manufactured for a small transfer on a plain surface.
When moving the printer outdoors, and in places with big step differences, then move the stand and
printer separately. For further details please refer to the Installation guide.
(2) Steps after transfer
Choose a suitable place to install the printer.
Step 1 :
Refer to "Installation guide"
Verify that the butterfly bolts fixing the stand with the printer are well fixed.
Step 2 :
Connect all cables.
Step 3 :
Perform a nozzle check, and verify that there is no clogging in the printer head.
Step 4 :
Refer to "Nozzle check"
Perform a head alignment.
Step 5 :
Refer to "Adjust print"
3
N°
1 Head unit
2 Butterfly screw
3 Head unit fastening material (metal plate)
44
Operation Instructions ValueJet 1604W
Chapter 3 : Installing the Unit
2
1
Name
AP-77300 – Rev 1.1 -17/09/2009,