Chart Page; Window Selections - Standard Horizon CPV550 Owner's Manual

13.0

CHART PAGE

The Chart page is the main page of the GPS Chart Plotter. From this page the user can zoom
in/out, pan around the chart, show information about cartographic objects, see the exact
vessel position with the COG and SOG, place points, GOTO a destination point, show Track
history etc. The GPS Chart Plotter is provided with a Worldwide background showing C-MAP
NT /MAX detail up to 2.0 NM. For more detail, optional C-MAP NT
+
1
Fix Status
2
Cursor coordinates
Speed Over Ground and
3
Course Over Ground
Distance and Bearings from Fix to
4
Cursor (if the Fix is NOT received,
DST and BRG are empty)
5
Chart Scale

13.0.0 Window Selections

The window on the right side of the Chart page is called the General Window and it may be
edited, customized or even changed to show a highway or compass tape.
FULL CHART (None)
2 LINES SMALL
1. To change, press [MENU] twice. Move the ShuttlePoint knob to highlight GENERAL
SETUP and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CHART PAGE and press [ENT] or move the
ShuttlePoint knob to the right.
4. Select the desired window, HIGHWAY or COMPASS, and press [ENT] or move the
ShuttlePoint knob to the right.
5. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.
CPV550
Figure 13.0 - Charts and general text area
GENERAL
HIGHWAY
Figure 13.0.0 - Data window layout
/MAX C-CARDs are used.
+
1 LINE SMALL
COMPASS
1
2
3
4
5
1 LINE LARGE
Page 65