2.3
CONNECTIONS
The CPV550 has a cable or connectors that are used to connect to a power supply, the
CPV350 to Power Supply, to the GPS WAAS Smart antenna, optional FF520 50/200kHz
BLACK BOX FISH FINDER, RADAR antennas and to NMEA devices such as VHF's, digital
instruments and autopilots.
2.3.0
Rear Panel Connections
DC INPUT Cable
Connects the radio to a DC power supply capable of delivering 12V DC.
PA Horn
Connects to 220SW, 240SW or any 4 Ohm 30W PA Speaker
External Speaker
Connects to the MLS-300, MLS-310 or any 8 Ohm 6Watt external speaker
ENHANCED SECOND RAM+ MIC Connectors
Connects to the enhanced RAM+ MIC (Remote Access Microphone) or the VH-310
Handset.
VHF ANTENNA Jack
Connects an antenna to the transceiver. Use a marine VHF antenna with impedance
of 50 ohms.
Page 14
Figure 2.5 CPV550 Rear Panel
CPV550