Transmitting A Position Request To Another Vessel - Standard Horizon CPV550 Owner's Manual

The CPV550 has the capability to turn off the Position Request ringer.
1. Select the chart page and press the [MENU] key two times. Move the ShuttlePoint knob
to highlight RADIO SETUP and press the [ENT] key or move the ShuttlePoint knob to
the right.
2. Move the ShuttlePoint knob to highlight DSC SETTINGS and press the [ENT] key or
move the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight RINGER OUTPUT and press the [ENT] key or
move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to select POLLING and press the [ENT] key or move the
ShuttlePoint knob to the right.
5. A popup window will be shown with On or Off, move the ShuttlePoint knob to select Off
and press the [ENT] key or move the ShuttlePoint knob to the right.
6. Press the [CLR] key until the menu disappears or an easier method is to move the
ShuttlePoint knob to the left a few times.
If you wish to return to enabling the ringer tone, just repeat the above procedure, moving
the ShuttlePoint knob to select On in step "5" above.

19.7.1 Transmitting a Position Request to Another Vessel

Using the Individual directory to make a Position request
1. Select the chart page and press the [CALL] key. The "DSC Operation" menu soft keys
will appear below the display.
Page 112
Figure 19.7.0 - POS REQUEST REPLY menu
Figure 19.7.0 - RINGER OUTPUT menu
CPV550