Information Page - Standard Horizon CPV550 Owner's Manual

CURSOR SPEED
MEASURE DISTANCE
WINDOWS SETUP
LANGUAGE
AUTO INFO
CURSOR WINDOW
CURSOR POSITION
COG TIME LINE
7.8

INFORMATION PAGE

From the Main Menu page it is possible to select an Information page containing Software,
Chart and Optional device information.
1. From the Chart Page, press [MENU] twice. Move the ShuttlePoint knob to highlight
About... and press [ENT] or move the ShuttlePoint knob to the right.
2. The Information page appears on the screen (see the previous Figure).
3. Press [CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.
Page 48
Selects the preferred speed among Low, Medium and High for the cursor in the Chart
page and within the menu.
When this function is turned on allows a distance to be measured between two points
using the ShuttlePoint knob and [ENTER] key.
This menu selection allows the data windows to be customized on the Chart and
Navigation pages.
Allows changing the language for menus and data screens.
By default when the cursor is moved over a buoy, Mark or other item a popup window will
show information of the item. This menu item allows the window to be turned on or off.
By default when the cursor is moved a window is shown with the Lat/Lon Distance and
bearing from the vessels location to the cursor. This selection allows the window to be
turned off.
The position of the cursor (vessels location) can be customized so it centered in the middle
or centered on the bottom of the chart page. The default is "Center".
Is a line projected from the vessel icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.
Figure 7.8 - Information page
CPV550