Setting Up Individual Reply - Standard Horizon CPV550 Owner's Manual

11. To store the data entered, press [ENT] two times.
12. To enter another individual address, repeat steps 4 through 11.
13. Press [CLR] until the menu disappears.

19.4.1 Setting up Individual Reply

Allows setting up the radio to automatically (default setting) or manually respond to a DSC
Individual call requesting you to switch to a working channel for voice communications.
When Manual is selected the MMSI of the calling vessel is shown allowing you to see who
is calling. This function is similar to caller id on a cellular phone.
1. Select the chart page and press the [MENU] key two times. Move the ShuttlePoint knob
to highlight RADIO SETUP and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight DSC SETTINGS and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight INDIVIDUAL REPLY and press [ENT] or move
the ShuttlePoint knob to the right.
4. A popup window will be shown with Manual and Automatic, move the ShuttlePoint
knob to the desired selection and press [ENT] or move the ShuttlePoint knob to the right.
5. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
CPV550
Figure 19.4.0 - INDIVIDUAL DIRECTORY menu
Figure 19.4.0 - INDIVIDUAL REPLY menu
Page 103