Load From File; Forecast; Real Time View; Type Of Data - Standard Horizon CPV550 Owner's Manual

16.0.0 Load from File

Allows to connect the software to the C-MAP weather server and to download C-MAP
weather data directly via C-COM.

16.0.1 Forecast

Allows selecting the Layer of specific weather data to be displayed on the screen and to
change date and time of the forecast preview. The following functions are available:
Panning: default usage of the cursor key is the normal panning function.
♦
Zoom in/out:
♦
Set of date and time: [D
♦
set steps
(updated every 3 hours)
Type of Data: [T
♦
Humidity, Temperature and Visibility.
Exit: [E ] to close the weather prediction page.
♦
XIT

16.0.2 Real Time View

The following selections are available:
Real Time View On: the data is shown (the area of the download) at the cur-
♦
rent date and time (received from the GPS).
Real Time View Off: the Weather data is not displayed.
♦
The layer displayed is the one selected into the previous menu item.

16.0.3 Type of Data

Allows selecting the type of data among: Wind, Wave Data, Weather, Humidity, Temper-
ature and Visibility, refer to the table in the Figure 16.
TRIP LOG – Shows the distance the vessel has traveled since the trip log was reset.
TRU Wind DIR SPD (Apparent Wind Direction) – Shows the True Wind Direction when a
external wind instrument with NMEA is connected.
TRU Wind SPD (Apparent Wind Speed) – Shows the True Wind Speed when a external
wind instrument with NMEA is connected.
TTG (Time To Go) – Shows time to go to reach a Destination point.
CPV550
Figure 16.0.0 - Download Area
allowed as usual by using
/T ]
ATE IME
to choose data among: Wind, Wave Data, Weather,
]
YPE
[ZOOM].
to choose date and time among the pre-
by the server
.
Page 81