Deleting A Mark Or Waypoint; Moving A Mark Or Waypoint - Standard Horizon CPV550 Owner's Manual

first digit in the name will be highlighted.
4. Move the ShuttlePoint knob up or down to select the first character.
5. Move the ShuttlePoint knob to the right to select the next character.
6. Repeat steps 4 and 5 until the Mark name is shown. Press [ENT].
7. Move the ShuttlePoint knob to the right and press [ENT] to change the Mark Icon's
Color.
8. Move the ShuttlePoint knob to up/down, left/right to select the Mark Icon's Color. When
finished press [ENT].
9. Move the ShuttlePoint knob to the right to select the Lat/Lon and press [ENT].
10. Move the ShuttlePoint knob up or down to select the first character.
11. Move the ShuttlePoint knob to the right to select the next character.
12. Repeat steps 10 and 11 until the desired position is shown. Press [ENT] and [CLR] to
store the Mark.
8.1.0

Deleting a Mark or Waypoint

Move the cursor over the Mark or Waypoint to delete. Press [D
window will be shown. Select YES and press [ENT].
8.1.1

Moving a Mark or Waypoint

Place the cursor over the Mark or Waypoint which you want to move. Press [M
ShuttlePoint knob to move the cursor. A dotted line, connecting the previous Waypoint
position to the new position, is shown:
Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
Page 50
Figure 8.1.1 - Moving Mark or Waypoint (I)
Figure 8.1.1a - Moving Mark or Waypoint (II)
]. A Warning popup
ELETE
]. Use the
OVE
CPV550