Goto Mark - Standard Horizon CPV550 Owner's Manual

GOTO MARK

1. Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor)
on the Chart page.
2. Press [GOTO] to show the GOTO popup window.
3. Move the ShuttlePoint knob to highlight MARK and press [ENT] to show the Marks/Wpt
List.
4. Move the ShuttlePoint to the highlight the desired Mark or Waypoint and press [GOTO].
5. You will notice a circle is drawn around the Icon Symbol. This means the GPS Chart
Plotter is now navigating to the point.
6. Press [CLR] to switch to the Chart page. If you place the cursor on the GOTO symbol
press [H ] to start navigating to the point.
IGHWAY
CPV550 Page 53