3. CONTROLS AND INDICATORS
This Section defines each control of the chartplotter. For detailed operating
instructions, refer to Section 8 of this manual. Refer to Figure 3.1 for the location
of the following keys and connections.
3.1 CONTROLS AND CONNECTIONS
The chartplotter is controlled by using 10 keys. There is also a ShuttlePoint knob to
move a cursor across the screen. As you press a key, a single audio beep confirms
the key action; every time the key pressed is not valid, three rapid beeps sound
indicates that no response is available.
Page 12
NOTE
Figure 3.1 - The chartplotter
GPS Chart 150