Communication Status - SolarEdge SE66.6KUS Installation Manual

Communication Status

This screen displays the status of connection option(s): LAN, RS485, cellular or ZigBee Plug-in.
Communication
LAN
Connected
Cellular
N/A
For each communication option, one of the following statuses is displayed:
Connected: The inverter established a successful connection and communication with the specified
l
server port
NC: Not Connected. Refer to Troubleshooting Communication on page 73
l
S_OK: The connection to the m onitoring platform is successful (should appear only if the inverter is
l
connected to the server)
N/A : Not Applicable
l
x of y: Number of devices connected out of all devices
l
Temporarily displayed (with a
l
Initializing communication
o
Connecting to a network
o
Connecting to SolarEdge servers
o
Error message (with the sign). Refer to Troubleshooting Communication on page 73.
l
-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
Chapter 5: Activating, Commissioning and Configuring the System Using the Inverter
RS485-1 RS485-2
SE Slave Modbus
NC 2 of 2
ZigBee
NC
clock sign):
51