SolarEdge SE66.6KUS Installation Manual page 36

d. Attach the other end of the conduit connector t o the conduit entry on the side of the
Connection Unit and push it in until it clicks into place.
e. Connect the lugs with the supplied machine screw to one of the captive screws at the top
corner of the Connection Unit .If you are using another Secondary Unit repeat this step
to connect the lugs to the Connection Unit.
f. Connect the DC wires (Plus and Minus) from the Secondary Unit(s) to the terminal blocks in
the Connection Unit. I f you are using another Secondary Unit repeat this step to connect the
DC wires to the Connection Unit.
-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
Figure 26: Connecting the conduit to the Connection Unit
NOTE
When connecting the right Secondary unit to the Connection Unit , loop the
conduit before connecting it to the Connection Unit.
Figure 27: Connecting the interlock
Chapter 3: Installing the Primary and Secondary Unit(s)
35