Manually Checking The Cleaning Device Functions; Safety - Fronius Robacta Reamer V Comfort Operating Instructions Manual

Manually Checking the Cleaning Device Functions

Safety

For the following tasks, the cleaning device must be supplied with compressed
air. This results in danger from the rotating cleaning cutter, cleaning motor mov-
ing up/down, gas nozzle clamping device moving out/in, flying parts (chips,
etc.), compressed air/parting agent mixture escaping from the parting-agent in-
jection nozzle.
This can result in severe personal injury and damage to property.
▶
▶
▶
Manually check- The relevant function is deactivated when the slots of the "Start cleaning" and
ing the cleaning "Spray in parting agent" screws are in a horizontal position.
device functions
1
2
3
Start cleaning function
Check the following while the function is executed:
-
-
-
48
WARNING!
Keep your body, especially hands, face and hair, as well as objects and all
items of clothing away from the cleaning cutter, cleaning motor, lifting
device, gas nozzle clamping device, wire cutter, and parting-agent injection
nozzle.
Wear hearing protection.
Wear protective goggles with side protection.
Move the welding torch into the cleaning position - see section
torch cleaning position
Disconnect the connection between the cleaning device and the robot con-
trol
Connect the cleaning device's compressed air supply
The function of the gas nozzle clamping device (piston of the clamping
device extends)
The immersion depth of the cleaning cutter in the gas nozzle (lifting device
moves the cleaning motor upwards)
The function of the cleaning motor (cleaning motor starts)
on page 36
Welding