Table of Contents
Advertisement
Bosch Rexroth AG
Technical data
NOTICE
To avoid overheating and to ensure a smooth operation of the product according
to the minimum distances specified in
16, air has to circulate.
This is a product that corresponds to the limit values of the emitted
interference of class A (industrial environments), but not of class B
(residential area and small enterprises).
When using the product in residential areas or small enterprises, the
operator has to take actions to prevent radio interferences (also re-
fer to DIN EN 55022).
7 Technical data
Processor
RAM
Connection for extension mod-
ules
Extension bus
Number of possible modules
Connection for S20 I/O
S20 bus parameters
Transmission rate
Number of connectable mod-
ules
Max. current for the S20 bus
(U
)
Bus
Communication interfaces
SD card
8/61
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Failure of the product due to overheating
chapter 10.1 "Installation notes" on page
IndraControl XM21: Intel E620T 600 MHz (CPU frequency)
IndraControl XM22: Intel E660T 1300 MHz (CPU frequency)
512 MB DRAM
Via the control bus base module XA-BS02
3
Via control bus base module XA-BS01 or XA-BS02
100 MBit/s
Max. 63 (per station)
2 A
RJ45 connections:
1 × Ethernet connection (10 MB, 100 MB, 1 GB)
●
2 × Sercos III master/slave interface
●
USB ports:
1 × USB host, maximum cable length 3 m (for the functionality,
●
refer to the system description of the respective system)
1 × USB device, maximum cable length 3 m (for the functionality,
●
refer to the system description of the respective system)
Slot for SD card
Controls
DOK-CONTRL -IC*XM2*****-IT03-EN-P
Hide quick links:
Advertisement
Table of Contents
