Controls
5
Date of manufacture (yyWww)
6
State of revision
7
CE conformity marking
8
Plant number
9
QR code
10 Serial number
11 Underwriters Laboratories Inc. mark
Fig. 2-1: Exemplary type plate
2.2 Scope of delivery
IndraControl XM21 or IndraControl XM22
●
24 V power connector XA-CN01
●
Bus base module:
●
– XA-BS01 (for S20 connection right)
– XA-BS02 (for S20 connection right and extension modules left)
3 Use of the safety instructions
3.1 Structure of the safety instructions
The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Structure of the safety instructions
3.2 Explaining signal words and safety alert symbol
The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also pro-
vides information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DOK-CONTRL -IC*XM2*****-IT03-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
Use of the safety instructions
12 Nominal current
13 Nominal voltage
14 Company address
15 MAC address, MAC address as barcode
16 Functional index
17 Manufacturing country
Consequences and
source of danger
Bosch Rexroth AG
3/61