Starting And Opening The Initial Firmware - Bosch Rexroth IndraControl XM21 Operating Instructions Manual

Bosch Rexroth AG
Device description
LED Function
E Start First Touch
Tab. 12-3: LED states
The LED states described are only valid together with the initial firm-
ware.
For more information on the LED states in operation, refer to the
functional description of the respective control system (IndraMotion
MLC, IndraMotion MTX).

12.2.3 Starting and opening the initial firmware

No system firmware is yet installed on the XM2x control upon delivery. Apply the
supply voltage and the control starts the initial firmware. Subsequently, open
one of the following functions via a menu structure:
Menu item number Functions
1 Start First Touch
2 Start First Touch, delete network configuration
3 Start First Touch, delete network configuration, reset user
name/password
4 Start First Touch, delete network configuration, reset user
name/password, delete files → Factory reset
Tab. 12-4: Menu items of the initial firmware
If the function was executed successfully, the LED "E" changes from
red to green after some seconds.
The control must not be switched off during this time.
The operation mode switch SF1 provides the following options to open the
menu items:
1. Press SF1 < 3 seconds to the position "Clear": Menu item navigation and
selection.
Whenever SF1 is pressed, the next menu item is selected. (1 > 2 > 3 > 4 >
1 ...)
40/61
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Color
Red
Flashing red
Green
Controls
Status
Function selected/processed
Confirm selection
First Touch running
LED
E
E
D
E
D
BT
E
D
BT
ERR
DOK-CONTRL -IC*XM2*****-IT03-EN-P
Color
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red