Standards Used; Ce Marking; Declaration Of Conformity; Ul/Csa Certified - Bosch Rexroth IndraControl XM21 Operating Instructions Manual

Bosch Rexroth AG
Standards

8.1 Standards used

Standard
IEC 60204-1
IEC 61131-2
IEC 60529
IEC 61010-2-201
UL 61010-2-201
Tab. 8-1: Standards used

8.2 CE marking

8.2.1 Declaration of conformity

The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2014/108/EC
The electronic products described in the present operating instructions are in-
tended for use in industrial environments and comply with the following require-
ments:
Standard
DIN EN 61000-6-4
DIN EN 61000-6-2
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device.
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.

8.3 UL/CSA certified

10/61
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Meaning
Electrical equipment of machines
Programmable controllers
Degrees of protection provided by enclosures (IP Code)
Safety requirements for electrical equipment for measure-
ment, control and laboratory use
Safety requirements for electrical equipment for measure-
ment, control and laboratory use
Title
Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard for indus-
trial environments
Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Immunity for industrial envi-
ronments
Controls
Edition
September
2011
March 2006
DOK-CONTRL -IC*XM2*****-IT03-EN-P
Edition
2007
2008
2014
2014
2014