Controls
Fig. 12-7: "Network configuration" dialog
The network settings are only applied after a control restart.
12.5.3 Firmware management
The "Firmware management" site provides the following information:
Fig. 12-8: "Firmware management" dialog
Current control mode:
●
– Initial mode: Initial firmware is loaded or active (initial firmware is shown in
the message window)
DOK-CONTRL -IC*XM2*****-IT03-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Bosch Rexroth AG
Device description
45/61