Leds And Operating Elements; Leds In The Xd1 Plug - Bosch Rexroth IndraControl XM21 Operating Instructions Manual

Bosch Rexroth AG
Device description
The XM2x controls are designed for a fast processing of control tasks. The XM2x
controls are configured and programmed with the engineering platform
"IndraWorks". The XM22 controls can be networked via the Ethernet interface
and connected to the drive modules via the Sercos interface. The XM2x controls
can be extended for various control tasks using S20 modules and extension
modules.

12.1 LEDs and operating elements

To operate and for the error diagnostics, there are multiple PEDs, an operation
mode switch and a "Reset" button on the front side of the IndraControl XM21/
XM22 control.
4
①
Reset button (behind sliding plate)
②
LED display, block of 10
Fig. 12-1: LED and operating element positions

12.1.1 LEDs in the XD1 plug

Fig. 12-2: LEDs on the XD1 plug
34/61
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
③
Operation mode switch SF1
④
LEDs on power connector XD1
ON
UL
T
Controls
1
2
3
DOK-CONTRL -IC*XM2*****-IT03-EN-P