Read — The management access is restricted to read-only, and changes cannot be made to the assigned
SNMP view.
Write — The management access is read-write and changes can be made to the assigned SNMP view.
Notify — Sends traps for the assigned SNMP view.
Defining SNMP Groups
1
Open the Access Control Group page.
2
Click Add.
The Add an Access Control Group page opens:
Figure 1-14. Add an Access Control Group
3
Define the fields in the Add an Access Control Group page.
4
Click Apply Changes.
The group is added, and the device is updated.
Displaying the Access Table
1
Open the Access Control Group page.
2
Click Show All.
The Access Table opens.
22