Switching On/Off - VCS VideoJet 1000 Manual

Switching on/off

Mains connection Included with the VideoJet 1000 is a power cable with the correct
matching plug.
Warning!
Ensure that the mains supply is free from interference such as over
voltages, spikes, or brownouts by using suitable mains conditioners
where necessary.
Only connect the VideoJet 1000 to the power source after all other
connections have been established.
The VideoJet 1000 is not provided with a power switch. The unit is
ready for operation as soon as the unit is connected to the power
and has rebooted.
"
Insert the mains socket into the connector Power.
"
Connect the mains cable into an earthed socket.
The green LED Power on the front panel of the VideoJet 1000
lights up, the unit is ready for operation.
If the network connection has also been established correctly, the
green Ethernet LED also lights up. A flashing red LED signals the
transport of data packages over the network.
VideoJet 1000
Installation
25