VCS VideoJet 1000 Manual page 60

Configuration with Web Browser
!
Partition type:
Choose here in which mode the recordings will be saved on the par-
tition.
Time lapse mode:
The recordings will be saved to the partition as planned in the
recording scheduler. However once the maximum storing capacity
has been met for the partition the recording process will stop. In that
case further recording on this partition is only possible if the parti-
tion is reorganised.
Ring mode:
In Ring mode the newest recordings are recorded over the oldest
recordings once the maximum storage capacity has been
achieved. E.g. if the maximum storage capacity of the partition
allows for a recording of 24 hours to be saved the recordings will
then run in a continues 24 hour loop. Only the last 24 hours of
recordings will be able to be viewed.
Partition size:
Here is where you need to choose how many alarms can be
recorded on the partition (max. 128) and the alarm pre- and post-
recording time lengths.
Also here you can select the partition size either by choosing how
long of a recording time you require or by setting the amount of
MBytes you would like to use in this partition - in both cases the
missing value will automatically be set.
If you have chosen to use the entire hard disk as one partition or
you are configuring the last partition you require just click the Use
all check box. The rest of the hard disks capacity will then be con-
figured into that partition for use.
58
GSM
for GSM connections
VideoJet 1000