Table of Contents
Advertisement
Configuration with Web Browser
grammed. You will see the length of time this demands from the
message Reconnecting in nn Seconds.
On conclusion of a successful upload, the unit will automatically
restart.
If the LED IN flashes on conclusion, the upload has been unsuc-
cessful and must be restarted. In order to execute the upload, it is
necessary to change over to a special page.
"
In the address field of the browser behind the IP address of the unit,
enter /main.htm in (e. g. 192.168.0.12/main.htm).
"
Restart the upload process.
Configuration download:
You can store the configuration setting of the device on a PC and
upload stored configuration settings from a PC to the device.
"
Click on the button Download. A dialog window is opened.
"
Follow the instructions in the dialog window to save the settings.
Configuration upload:
"
Enter the complete directory path of the file to be uploaded or click
on the button Durchsuchen... to select the desired file.
"
Make sure the download file is taken from a VideoJet 1000 device.
"
Click on the button Upload to start the transmission of the file to the
device.
After a few seconds the message Configuration upload finished.
State: Configuration upload ok. (system must be rebooted) will
be displayed and the countdown for the reconnection is shown.
At the next call-up of the configuration page Software update the
message Configuration upload ok confirms the successful com-
pletion of the upload. If the message Configuration upload failed
is displayed, the file was not correctly uploaded (e.g. because it
didn't derive from the same type of device). Repeat the upload pro-
cedure, possibly with a different file.
118
VideoJet 1000
Hide quick links:
Advertisement
Table of Contents
