VCS VideoJet 1000 Manual page 89

File name:
You can set what file names are to be generated for the transmitted
snapshots.
!
!
!
JPEG posting time slice:
Enter the time interval here at which the single images are to be
sent. Enter zero, if no single images are to be sent.
FTP server IP address:
Enter here the IP address of the FTP server on which the images
are to be stored.
FTP login name:
Enter your login name for the FTP server here.
FTP password:
Enter the password for the access to the FTP server here.
Path on FTP server:
Enter the exact path here under which the images are to be stored
on the FTP server.
VideoJet 1000
Overwrite: The same file name is always used. The existing file
is continuously over-written with current data.
Increment: A number from 000 to 255 is attached to the file-
name. This automatically increases by 1 every time a new file is
created. When 255 is reached the numbers begin again
at 000.
Date/Time suffix: A date and time code are automatically incor-
porated into the file name. When choosing this setting take care
that the device's date and time are set correctly.
Example: the file snap120401_114530.jpg was saved on
12th April 2001 at 11.45 and 30 seconds.
Configuration with Web Browser
87