VCS VideoJet 1000 Manual page 39

Camera settings
Camera name:
Enter here the required camera name. The camera name is used
for easier remote identification of the camera location, e.g. on an
alarm call. Enter here an unambiguous and clear name.
Controllable device:
Make a selection here from one of the controllable devices. If it is
required to use the serial port for the transmission of transparent
data, select the entry Transparent.
Note
When a device is selected, the settings for the serial port 1 are
recalled and the parameters are automatically entered in the
window COM 1 settings and should not be changed.
VideoJet 1000
Configuration with Web Browser
37