VCS VideoJet 1000 Manual page 101

First/Second SNMP host address:
Enter the IP addresses of up to two chosen receivers here if the
alarm message is to be sent via SNMP-traps.
Alarm
connections
Options are provided to specify the behavior of the VideoJet 1000
in the event of an alarm.
The VideoJet 1000, for example, can establish the connection to a
predefined IP address (VideoJet 1000 receiver or PC with receiver
software) automatically. ou can enter up to 10 IP addresses to be
contacted in turn in case of an alarm until a connection has been
established.
Connect on alarm:
Select On, to automatically establish the connection to a predefined
IP address in the event of an alarm.
Connection type:
Depending upon the operating environment (network configura-
tion), select here the transmission standard for the alarm connec-
tion to the defined IP address.
Note here the selections for MPEG-2 and MPEG-4 (see page 63).
Number of video receiver address:
Here you can assign the numbering for the IP addresses that shall
be contacted in case of an alarm. The device contacts the
VideoJet 1000
Configuration with Web Browser
99