VCS VideoJet 1000 Manual page 112

Configuration with Web Browser
Warning!
Multicast operation is only possible using the UDP protocol. The
TCP protocol does not support any multicast connection.
Ethernet link type:
When the VideoJet 1000 is connected to the network with a switch
both devices have to have the same settings for the Ethernet link
type. Ask your network administrator for the setting of the respec-
tive switch if necessary.
You can choose 10 or 100 MBit/s each with full- or half-duplex mode
(FD resp. HD) or you can choose Auto if the link type is to be flex-
ible.
Warning!
There can be failures like image interferences and the like if the set-
ting of the VideoJet 1000 differs from the setting of the connected
switch, e.g. if the switch is set on Auto but the VideoJet 1000 is set
on 10 MBit/s HD.
110 VideoJet 1000