VCS VideoJet 1000 Manual page 102

Configuration with Web Browser
addresses in the order of the numbering until a connection has
been established.
Live video receiver IP address:
Enter here the IP address to which a connection is to be established
in the event of an alarm.
Remote receiver password:
Here you can enter the receiver password in case the receiver is
protected by one.
Live video auto-connect:
Select here the option On if it is required to re-establish a con-
nection to the previously specified IP address after each restart,
e.g. after a connection breakdown or network dropout.
Direction of alarm connection:
Select here if an outgoing, incoming or bidirectional connection is
to be established in case of an alarm.
100 VideoJet 1000