VCS VideoJet 1000 Manual page 125

Image quality With established connections, the video image is displayed in the
middle of the browser window. Depending upon configuration,
other information may also appear in the display (see page 122).
The VideoJet 1000 provides either a live image (MPEG format) or
single video frames in JPEG format.
"
Click on the navigation bar at the top of the screen on one of the
links MPEG-2, MPEG-4 or M-JPEG, in order to display or decode
the video sequences in the corresponding image format.
"
Above the video image, click on one of the links 352X288 or
704X576, to display the image in the selected resolution.
Alarm In the event of an alarm, the alarm symbol is displayed in red along
with the video image. The display of alarms and other details is
dependent upon the configuration of the unit (see page 114).
Output Depending upon configuration, equipment can be switched by the
relay of the VideoJet 1000 (e.g. a floodlight or door opener).
"
To activate the relay output, click on the relay symbol beside the
video image. The symbol will be displayed in red when the relay is
activated.
Control functions Possibilities for the control of peripheral equipment
(e.g. pan and tilt heads) is dependent upon the
installed equipment type and on the configuration
of the VideoJet 1000.
If a controlled unit is connected to a VideoJet 1000
and configured, the active elements for the control
of the peripheral unit (e.g. a dome camera) will be
displayed alongside the video image.
VideoJet 1000
Operation
123