Table of Contents
Advertisement
Configuration with Web Browser
Recording
scheduler
Here you setup the parameters for local recording onto the hard
disk. Recordings can be predefined to take place uninterruptedly
over specified periods or only in case of an alarm.
Partition selection:
First choose the partition that shall be active, i.e. on which the
recordings shall be stored. Once you have completed setting your
recording times this partition can then be activated by clicking on
the Start button.
Note
You can only activate one partition on the hard drive at a time.
The activation of a different partition is not possible automatically.
Only manual activation is possible.
Time recording:
This is where the periods will be set for the continuous recordings
to the hard drive. To do so mark one or more time slots for each day
by dragging with the depressed mouse button.
By clicking on the Clear button all previously set time slots will be
cancelled, clicking on the Set button will transmit the data to the
VideoJet 1000.
96
VideoJet 1000
Hide quick links:
Advertisement
Table of Contents
