Switching On/Off - VCS VideoJet 8000 User Manual

Installation

Switching on/off

Power connection
The VideoJet 8000 package includes a power cable with a computer style
receptacle.
Warning!
Use suitable facilities where necessary to ensure that the mains supply is
free of interference such as voltage surges, spikes or brownouts. Only
connect the VideoJet 8000 to the mains supply after all other connections
have been established.
The VideoJet 8000 has no power switch. When the unit is connected to power, it
is ready for operation after startup.
– Attach the connector of the power cable to the Power socket.
– Plug the power cable into a fused power socket. The green Power LED on the
front panel of the VideoJet 8000 should be lit.
– After startup, the unit is ready for operation when "VideoJet 8000" appears on
the display.
If the network connection is in order, the green LED for the RJ45 jack
10/100/100 MBit Base-T on the back of the unit should be lit. The flashing orange
LED indicates data traffic on the network.
22
Chapter 4
VideoJet 8000