Table of Contents
Advertisement
Configuration with Web Browser
Subnet mask:
Enter here the corresponding subnet address if the unit is to com-
municate via a subnet.
Gateway IP address:
Enter here the appropriate IP address if the unit is to independently
establish a connection outside of the local network. This field can
otherwise remain empty (0.0.0.0).
Video/Audio transmission:
If the device is used in front of a firewall, transmission over TCP
(Port 80) should be selected. If used in a local network select UDP.
Warning!
Multicast operation is only possible using the UDP protocol. The
TCP protocol does not support any multicast connection.
Multicast streaming:
Along with a 1:1 connection between a transmitter and a receiver,
(unicast) the VideoJet 1000 provides the option of connecting a
number of receivers to simultaneously receive the video signal.
This is achieved either by a duplication of the data stream in the unit
with subsequent distribution to a number of receivers (multi-uni-
cast) or by distribution of a single data stream on the network itself
to a number of receivers in a defined group (multicast).
Select here the option On in order to activate the multicast function.
Note
Requirement for multicast operation is a multicast compliant net-
work with implementation of the UDP protocol and the IGMP proto-
col. Other group management protocols are not supported. The
TCP protocol does not support any multicast connection.
68
VideoJet 1000
Hide quick links:
Advertisement
Table of Contents
