Table of Contents
Advertisement
Configuration with Web Browser
Relay follows:
Select a particular event by which the relay is to be activated as
required. The following events can activate the relay:
!
!
!
!
!
!
Relay name:
The relay can be assigned a name from here. The name will be
shown on the Overview page and, dependent upon configuration,
also on the livepage.
Trigger relay:
Click on the button Relay 1 to manually switch the relay (e.g. for
test purposes or to operate a door opener).
106
Off: No relay triggering by events
Connection: Triggering if any connection is established
Video alarm: Triggering caused by loss of the video signal
Motion alarm: Triggering by the motion alarm
Local input: Triggering caused by an external alarm sensor
Remote input: Triggering by a switching contact from a remote
location
VideoJet 1000
Hide quick links:
Advertisement
Table of Contents
