VCS VideoJet 1000 Manual page 109

COM1 serial data
port/interface
settings
The parameters for the serial interface port COM1: RS232/485 can
be configured to suit individual requirements.
Serial port function:
Select one of the controllable devices from the list. If the port is
required to transmit data transparently, select the entry Transpa-
rent.
Note
After selection of a device, the remaining parameters in the window
are automatically set and should not be altered.
Baud rate:
Select the value for the Transmission rate in bits/s.
Data bits:
Select the number of data bits per character.
Stop bits:
Select the number of stop bits per character.
Parity check:
Select the type of parity check.
VideoJet 1000
Configuration with Web Browser
107