VCS VideoJet 1000 Manual page 69

Ethernet settings
The settings on this page are used to integrate the unit into an exist-
ing network.
Internet IP address:
Enter here the required IP address for the VideoJet 1000. The IP
address must be valid for the network.
Warning!
Changes in IP address, subnet mask and/or gateway IP address
are transferred to the device by clicking on the button Set, but they
are only valid after a reboot!
For a reboot simply enter the old IP address into the address bar of
the Browser followed by /reset, after that the unit can only be
accessed via the new IP address.
VideoJet 1000
Configuration with Web Browser
67