VCS VideoJet 1000 Manual page 41

!
!
Warning!
Light reflections (e.g. in glass facades), switching on or off of flood-
lights or light level changes caused by cloud movement in bright
daylight can cause undesirable responses from the video sensor
and thereby generate false alarms. Carry out a number of tests for
different day and night time conditions in order to ensure correct
operation of the video sensor.
For surveillance of indoor areas, ensure a constant lighting of the
areas during the day and at night.
Uniform surfaces without contrast can trigger false alarms even
with uniform lighting.
"
Click on the button Motion detector, to open the page for the con-
figuration of the video sensor.
"
If required, click on the button Defaults, to reset all values on this
page to standard values.
"
When configuration of the video sensor is complete, click on the link
Overview on the navigation bar to return to the graphical overview.
VideoJet 1000
Individual parameters must be matched to the environmental
conditions and to the required responses.
The sensitivity must be set to a value >0.
Configuration with Web Browser
39